Why you should retrofit your home with foam insulation in Toronto

The majority of homes in North America especially Toronto are insulated with an air-use insulator,  either fiberglass, or cellulose. Dead air and the principles of convection and advection (R-factor) are how these materials are expected to insulate our homes and buildings. The issue lies in that the thermal dynamics working against the envelope of the building are more powerful and intricate than the air use insulator can control. For example, the R-30 loose fill in the majority of attics; in just a couple of hours, radiant heat can build up in your attic to 60 degrees celsius and completely pass through the R-30 and start heating up your house while jacking up the power bill, this is especially true if you have an HVAC system where the ducts and vents are in the attic. Your house should be cooling down when the sun sets, but the air-use insulator will retain the heat and not allow for the house to cool down for several hours.

Conventional insulation really becomes energy hungry in the winter time. When indoor air is heated and the house becomes like a hot air balloon. When the air is heated, it wants to rise and pass through the loose blown in insulation in your attic flooring. When this rise of air occurs, the mass of air takes with it temperature and moisture in the envelope of the house and moves it to the attic. Air mass expansion in the summer months, creates a required pressure release through bents in the attic, this pressure has to be equalized  so that it doesn’t push it into the living area. These vents allow for the heated air to be pushed through allowing for newer cooler air to replace it and start the process over again.

It’s always a good idea to have a look at where the money will be spent, and where it will be best spent before retrofitting your home. Make sure to contact the right insulation contractors Toronto has to offer. Up to %35 of energy is either lost or kept through the roof of the house. Crawl spaces of a home can contribute up to %30 in energy cost and the windows, doors and walls make up the rest. Stop all radiant energy fro entering the building by spraying open cell polyurethane foam under the or against the roof deck. In the hot and humid summer months, humidity is kept from entering the house. Without radiant energy, there is no expanding air mass. Without expanding air mass, vents aren’t needed and by not needing vents, there is a stop of temperature fluctuations in the winter months and your HVAC system doesn’t  have to work overtime.

The roof should be sprayed as it is the largest contributor of energy loss in the envelope of the whole house, followed by the crawl space. Trying to re-insulate walls is a bit tricky and has little payback. Always contact the most reliable spray foam company when you are heating or cool in the air inside of your home, it’s because you retrying to create a different climate inside your home compared to what’s going on outside. When you install open cel polyurethane foam, it eases the burden on you HVAC system which saves you money in the end. You re-coup the initial investment after 3-7 years of energy savings.


When and Where to Buy Home Renovation Materials

I worked for a roofing company in college, and my boss liked to tell the story of a material mishap he suffered shortly after starting his business. He’d been working hard installing a new asphalt roof for a customer who was away on business. There he was putting down the final shingles when she pulled up to the house. “It looks nice,” she shouted from the driveway. “But it’s the wrong color.”

That lesson has stuck with me all these years, along with the implied importance of getting material orders right on a remodeling project. Recently, the Consumer Reports National Research Center surveyed general contractors about the mistakes that lead to the biggest delays and cost overruns on a project. On their list of culprits, materials arriving broken or different from what was ordered was second only to existing structural damage.

When the time came to renovate my own home—a 19th-century brownstone in the Bedford-Stuyvesant neighborhood of Brooklyn—I vowed to avoid that pitfall by ordering many of the home renovation materials myself and getting them to the site well ahead of when they would be installed, just in case there was a problem.

In addition to avoiding costly mistakes, the decision helped with budgeting because my architect agreed to lower her fee if we managed that part of the project. By building ample lead time into the process, I could also hold off on certain purchases if I knew a sale was coming—during one of the summer holiday weekends, for example, when deals abound on everything from paint to ceramic tile.

Settle on a Style

If you plan to buy your own home renovation materials, you really need to know your style. My wife and I spent hours on sites such as Houzz, Pinterest, and Remodelista, creating a digital ideabook of photos to help pinpoint our design preferences. Our tastes skew traditional, with a few modern flourishes here and there, so we fall in the so-called transitional camp of home design.

The next step was figuring out where to shop. There’s no shortage of home centers in the New York metro area, and most of them provide free or affordable design advice, as well as the names of local installers. But we already had an architect and general contractor on board, plus the volume of selection at places like Home Depot and Lowe’s felt a little overwhelming.

So we looked into dedicated kitchen and bath showrooms, which offer a more curated selection of products and knowledgeable staff. At the recommendation of our architect, as well as friends and colleagues who had recently remodeled, we ended up choosing Ferguson for the kitchen and bath fixtures, and a pair of tile showrooms, Nemo Tile and Tile Bar, for the tile work. Below is our advice for getting the most out of those visits.

Bathroom remodelling image

Check out the full article on home renovation materials here: http://www.consumerreports.org/home-remodeling/when-and-where-to-buy-home-renovation-materials

Upgrading Your Home with Spray in Insulation

Spray In Insulation is a cheap alternative method to traditional building insulation. It works by having an expanding form from a mixture of two components. The form is mostly made from Polyol resin and Isocynate after combining at the tip of the gun.

The method is very important in keeping your home cool in the summer and warm in the winter. This is because of the rising energy bills when any source of energy is used. Thus, when building or renovating a bought house, you can improve its comfort by using this affordable method.

Where to Insulate

You should add insulation in the following areas Attic, walls, floors, basement, and crawlspace. In addition to that, this will be the cheapest way to improve your home’s energy efficiency. However, you can inquire about crawl space and basement insulation from your contractors.



Materials Used for Insulation

Insulation is made from a number of different materials. These come in four different types namely: loose-fill, rolls and batts, rigid foam, foam-in-place. Blankets or rolls and batts are made from mineral fibers like fiberglass and the rock wool. These flexible materials come in widths suited to standard spacing of wall studs and floor joists or attic: 2 inch by 4-inch wall can take R-13 or R-15 products; 2 inch by 6-inch walls can use R-19 and R-21 batts.

Loose-Fill insulation is mainly made as loose fibers or fiber pellets from fiberglass, rock wool, or cellulose. This material is blown into the spaces by special pneumatic equipment. The material adapts easily to odd-sized building cavities and attics with wires, ducts, and pipes. This makes it suitable for use in areas where other types of insulation fail to work well.

Rigid Foam Insulation is very effective in exterior for basement wall sheathing or other special applications like attic hatches. Foam insulation R-values have range of between R-4 to R-6.5 per inch of thickness. Moreover, this form of insulation material is 2 times greater than other insulating materials.

Foam-In-Place Insulation is mainly used to insulate and reduce air leakage. The material is blown into walls, under floors or on attic surfaces. Thus, you can use small-pressurized cans to block small holes and cracks. These can be like the ones on doors, windows frames, plumbing and electrical penetrations.

Tips to Consider before Insulation

Here are some tips given by the local insulation contractor, , about what you should consider before insulating your home. There are key factors to consider before you think of doing insulation in your home. You should first consider the climate of our home area, home design and budget. This will help you in choosing the best insulation most suitable for your home.

You should also consider using higher R-value insulation like spray foam on the exterior walls and in cathedral ceilings. This ensures you achieve more insulation with reduced thickness. You should as well consider fixing attic air barriers along the attic eave. This helps in reducing summer cooling bills as it ensures proper airflow.

You should consider whether the fixture next to where you want to place the insulation is insulation contact rated. This helps in avoiding a fire danger. You should finally follow the installation instructions from the manufacturer. In this regard, you should always wear genuine protective gear when installing.


You will end up saving more money in most climates when you install a combination of insulative sheathing and cavity. This can be better done if the installation is done when building a new home or addition.

Moreover, you can reduce exterior wall leaks by fastening the joints of exterior sheathing and closing the gaps on exterior walls. These helps in reducing the amount of energy lost through the wood frames.

Equipment Needed for a DIY Home Renovation

As a homeowner, there comes a time to renovate your home in areas like plumbing, wall painting, electrical, welding etcetera. Apart from having the requisite skill to carry out the renovation, an important thing to keep in mind is that repair comes with associated risks.


The risks of carrying out a repair include accidents such as falling from a height, toxic chemical poisoning, fire burn, injury from a saw, foot injury from stepping on sharp objects, hearing due to extreme noise, eye accident from debris, and lung tract blockage from dust among other.

Apart from knowing the related accidents, knowing about different safety equipment is more important.

The Dozen Pieces Safety Equipment You Need For A DIY Home Renovation

Below is a list of essential twelve safety equipment for your DIY home renovation.

  • Goggle and Glasses

Wearing impact resistance safety goggle or glasses are important, especially when using power tools for drilling to protect you from dust or other flying debris.

  • Dust Extractor

Dust safety equipment protects you from possible airborne dangers, particularly your lung, from dust or fumes arising from sawing, sanding or cutting of metals. The material comes in different mask forms like simple gauze to prevent fine particles, to complete facial respirator that prevents poisoning from fumes.

  • Helmet

It provides protection to the head; from falling off the ladder to bumping your head and possible objects falling from the top on your head. Using Helmet at a renovation site protects you from possible head injury.

  • Face mask

Facemask keeps you safe from airborne dangers. It is used in dusty renovation site where you have to work for an extended period.

  • Knee pads

If your renovation includes laying tiles, you need a good pair of quality knee pads to reduce the harsh impact of the floor on your knees. It protects your knees against accidental injuries like kneeling on sharp objects.

  • Earplugs or Ear Protector:

The earplugs or protector helps to reduce the impact of extreme noise when you have to drill, scrape or file metal objects, the grinding noise can harm your ear drum.

  • Voltage tester:

It protects you from electrocution. The voltage tester let you know if the wire or cable located in the area you are working is electrically charged or not.

  • Safety Boot:

You need a pair of quality safety boot to wear anytime you are working to protect you from danger. For the best safety boot check out Work Boot Worx!

  • First Aid Kit:

Even with all the Safety Gears in place and used on during renovation, an accident may still happen. It is in such situations that a first aid kit comes handy.

  • Hand Gloves:

Although you may not need to wear them all the time, hand gloves are essential for tougher jobs like perimeter fencing or lifting heavy and rough objects. Since hands are used for most renovation tasks, you need hand gloves for adequate hand protection against cuts, bruises, burn and chemical spillage.

  • Protective Clothing:

Quality protective clothing would provide protection against skin bruises, cuts or stains on your cloth or body. In accidental chemical spillage, your protective clothing takes the spill and protects your skin.

  • Fire extinguishers:

Lastly, on the list is a fire extinguisher to protect sudden outbreak of fire during a renovation.

Stucco and Stone Professionals

When it comes to updating a home or business, you may not immediately think of stone and stucco work. Not only does this task seem like it would take a long time and leave a mess on your property, but you might be unsure about the process that goes into this type of work. What lots of people don’t realize, however, is that having stone or stucco work done on your home or business can be quick and highly effective if completed by the right team of contractors. Not only will the process be fast and painless, but it will leave you with wonderful results that will truly add value and beauty to your residence or business.

You have many different options if you are thinking stone is right for your home. One of the most popular is stucco stone masonry. This is the process of taking individual rocks and using them to build a wall, patio, terrace, fireplace, or more. Stone masonry is very aesthetically pleasing and can be customized to fit your tastes exactly. For example, you can choose the type of stone you want used plus the cut of the stone. This assures that your exact vision is adhered to and that you will be more than satisfied with the results.
stucco contrcators doing a commercial building
There’s nothing more solid and reliable than stone steps. If you’re looking for the right steps to lead to your patio or back door, you can’t go wrong with stone. Stone steps won’t wear away over long winters or become chipped from dropped tools or foot traffic. By installing stone steps on your property, you are guaranteeing long-lasting and great-looking steps that you will be more than satisfied with.

If you’re looking for the right exterior for a new construction or even for your existing home, why not think about stucco? Stucco looks terrific and can be customized to fit your specific tastes, plus it works great for keeping in heat, keeping cool in the summers, and never erodes or flakes off with the right finish.

Don’t forget about driveways and walkways. When you wish to escape from the usual black tar paving, why not have your driveway or sidewalk done in stone? Much like with walls and steps, driveways and walkways can be done in customized stone, giving your property a highly individual and striking look. Not only does it look great, but a stone driveway is of high quality and will last for ages before any repairs are needed.

All of these services can be completed on time and within your budget. If you have a vision for stone work on your property in Toronto Ontario , speak with your local stucco contractors, show them your property, and make sure you are on the same page for the work you want done. A good contractor will have a team of highly trained and professional masons who will get the job done within your time frame and never leave your property in disarray. It won’t cost an arm and a leg either, since there are always a number of options for stone-type and cut. So if you are in the market for unique and highly effective updates for your home or business, or are in the process of building a new structure, then contact a professional stone and stucco contractor and let them know your vision. You won’t regret it.

Questions to ask a local contractor

If you type in the search engines for a professional contractor for whatever service you need, you will find a ton of recommended people to hire. Problem is some of the reviews are all fake and you need to make your choices and research when you decide to remodel your home. If you do not you will end up spending a ton of money on a project you are not happy with.
Here are some good questions to ask the local contractors when you need to find the best for the job:

1.    Find out if the have liability. Ask them for a copy of the certificate and make sure it covers at least 500 thousand at the bare minimum.
2.    Do you have Workman’s Comp insurance? How soon can I get a copy?
3.    Home many employees they might have is a good thing to know. Also if the work with other subcontractors and if they can give you there information as well.
4.    Does your service require licensing? In Toronto roofers must be registered with full licenses to operate, and plumbers and electricians have actual supply you with there certificate numbers. All other contractors are in the clear and do not have to show you anything by law, so those are the ones you really need to pay close attention to.
5.    Another point to consider is if they can give you the full estimate and requirements in writing. It is always better to be safe than sorry. I have seen so many people not do there research and end up paying for a simple job 2 times from their own pocket, either because it was done wrong or they contractor disappeared on them. So please make sure you look into all the fine print and reviews when hiring one of these services.

Contractors workers people.